New customers get 20% off.Get a quote
Freshly painted interior hallway with clean neutral walls and white trim
Trim & Door Painting

Paint or Replace Interior Doors? How to Decide

Caleb's Creations Team · Painting and Staining Professionals Serving Barrie and Simcoe County · November 13, 2026

Freshly painted white panelled interior door in a hallway of an Ontario home with brushed nickel handle
A sound panelled door with a fresh enamel finish looks new and keeps the fit it already has in its frame.

If your interior doors are solid, square in their frames and close properly, painting them is usually the better choice: the door keeps its fit, the hardware stays where it is and a fresh enamel finish makes it look new. Replacing makes sense when the door itself is damaged, warped or the wrong style for the room, because paint can change the colour and finish of a door but not its shape.

Most homeowners start asking this when the doors look tired next to freshly painted walls: yellowed white, chips around the handles, dark marks along the edges. In many Simcoe County homes those doors are perfectly sound underneath. The sections below explain how to tell, and what each option involves.

Signs a Door Is Worth Painting

A door is a good candidate for repainting when the problems are on the surface:

  • Yellowed or dull paint, common on older oil-based finishes.
  • Chips and worn spots around the handle and along the latch edge.
  • Scuffs, marks and grime that will not wash off.
  • Small dents and dings that can be filled and sanded smooth.
  • A colour you no longer want, such as a dated stain or a builder beige.

If the door opens and closes without sticking, latches cleanly and sits evenly in the frame, all of that is fixable with cleaning, sanding, filling, primer and two coats of a hard enamel. Our guide to painting interior doors goes through each of those steps.

Painting also keeps everything around the door the same. The hinges, the latch strike and the casing were fitted to that door. A replacement has to be fitted again, and in older homes the frames are rarely perfectly square.

Close view of a worn, chipped painted interior door edge around the handle before repainting
Chips and grime around the handle are a paint problem, not a reason to replace the door.

Signs a Door Needs Replacing

Some problems are in the door, not the paint, and repainting will not fix them:

  • Cracked or split panels, or a door that has come apart at the joints.
  • A warped door that no longer closes or latches, even after the hinges are tightened.
  • Water damage: a swollen or crumbling bottom edge, common on bathroom and laundry doors and on doors next to an exterior entry.
  • Peeling veneer or a delaminating skin on a hollow-core door.
  • Holes punched through a hollow-core door, which can be patched but rarely invisibly.
  • The wrong style: paint cannot turn a flat slab into a shaker or panelled door.

If only one or two doors in the house fall into this list, a common approach is to replace those and paint the rest to match, so every door ends up the same colour and finish.

Cracked panel on an old interior door, showing damage that paint cannot fix
A split panel or a swollen bottom edge is damage to the door itself, which no coat of paint can repair.

Older Doors and Lead Paint

Many homes in Barrie, Orillia and the older parts of Simcoe County towns still have their original doors, often solid wood with many layers of paint. These are usually worth keeping: solid doors are heavier, quieter and better made than many replacements.

They can also carry lead paint under the newer coats. Health Canada's guidance on lead-based paint says "your home probably contains lead-based paint if it was built before 1960," lists doors among the surfaces where everyday wear can disturb old paint, and warns: "Do not use sanders, heat guns or blowlamps to remove lead-based paint." That changes the prep. In an older home we ask when it was built and plan light scuff sanding and the right primer rather than stripping the door back to bare wood.

Older doors are also often finished in oil-based paint, which latex will peel off unless the surface is cleaned, scuffed and primed with a bonding primer first. Our guide to painting over oil-based trim explains how to tell and what it takes. The same applies to doors.

New Doors Still Need Painting

Replacing a door does not take painting off the list. Many new interior doors are sold primed only, not finished. Once a carpenter has hung and fitted them, they still need a light sand, two finish coats and the edges painted, the same as an existing door. If the casing is replaced at the same time, that needs filling, caulking and painting too.

So when you compare the two options, the real comparison is:

  • Paint the existing doors: prep, primer where needed, and finish coats.
  • Replace the doors: buying the doors, having them hung and fitted, new hinges or hardware if the old ones do not line up, and then the same finish painting.

Replacing and fitting doors is carpentry, which we do not do. If some of your doors need replacing, we can paint the new doors and casings once they are hung, together with the existing doors, so they all match.

New primed interior slab door laid flat on sawhorses in a garage, ready for finish paint
New doors often arrive primed only, so they still need sanding and finish coats once they are hung.

What Affects the Cost of Painting Doors

Painting doors is detailed work, so the price is usually per door rather than per square foot. What moves it:

  • Panelled or flat: a six-panel or shaker door has more edges and recesses to cut in than a flat slab.
  • One side or both, and whether the edges and the casing are included.
  • Condition: the amount of filling, sanding and spot priming.
  • Oil-based or lead paint underneath, which needs a bonding primer or careful prep.
  • Colour change: going from a dark stain to white takes primer and extra coats.
  • Number of doors: closets, pantry and linen doors add up quickly in a full house.

Doors are often painted along with the trim in the same rooms, and that is usually the best value because the prep and set-up are shared. See our trim and door painting service, our page on trim and door painting in Barrie, and Trim Painting 101 for how the trim side works.

Common Questions About Painting Interior Doors

Can a hollow-core door be painted? Yes. Hollow-core doors paint well as long as the skin is intact. Light sanding, primer and two coats of enamel give the same finish as a solid door. Avoid heavy sanding, because the outer skin is thin.

Should doors be painted on or off their hinges? Either works. Taking doors down lets the edges and both faces be painted evenly; painting them in place keeps the rooms usable. We decide door by door and say which in the quote.

Can I change a stained wood door to white? Yes, with a cleaning, a scuff sand and a bonding or stain-blocking primer first, so the wood tones do not bleed through the new white.

How long before a painted door can be closed? Enamel feels dry within hours but stays soft for days, so a fresh door can stick to its stops if it is shut too soon. Our article on how long to wait before closing a painted door explains the timing.

Getting Your Doors Painted in Simcoe County

Caleb's Creations paints interior doors, closets and trim across Simcoe County and the Georgian Bay towns, including Barrie, Wasaga Beach, Collingwood and Orillia. At the walkthrough we look at each door with you, tell you plainly which ones are worth painting, and write the doors, edges, casings and coats into the quote before work starts. New customers get 20% off. When you are ready, request a quote and we will go through your doors with you.

Need a Painter in Simcoe County?

Call to describe your project. We assess the surfaces in person, confirm what preparation is needed, and provide a written scope before scheduling.

Ready for a quote?Call (905) 960-0254